JUGS Sports Jr. Baseball & Softball (1 wheel) Pitching Machine - Manual (Page 15)

• C arefully lift machine from carton and place on level surface.
• Make sure you have all the parts (See Figure 3). If any parts are missing, do
not operate the machine until the missing parts are replaced. Failure to do so
could result in possible serious personal injury.
• Do not discard the packing materials until you have carefully inspected the
machine, identified all the parts, and satisfactorily operated the machine.
NOTE: If any parts are damaged or missing, do not attempt to plug in the power
cord and turn on switch until the damaged or missing parts are obtained and are
installed correctly.
13
WARNING: To prevent accidental starting or electrical shock that
could cause possible serious injury, assemble all parts
to your machine before connecting it to the power
supply. The pitching machine should never be connected
to a power supply when you are assembling parts, making
adjustments, cleaning, servicing, or when not in use.
Unpacking
Assembly
JUGS is shipped with the base secured tightly to the “top” of the machine.
1. Separate the “top” from the base casting.
a. Loosen the horizontal T-clamp.
b. Grasp the lifting handle and pull the “top” off the base.
This can be done very simply with one person holding the “top” and a
second person holding the base casting.