JUGS Sports Jr. Baseball & Softball (1 wheel) Pitching Machine - Manual (Page 18)

4. Attach the feed chute.
a. Remove the bolts holding the rubber pad bracket to the rotating plate.
b. Select the correct feed chute for your intended use. Your JUGS comes
with two feed chutes: the larger one is for softball, the smaller is for
baseball, lacrosse and field hockey (see Figure 11).
c. Attach the selected feed chute to the rubber pad bracket by using the
two bolts provided.
5. Attach the rubber pad bracket to the rotating plate.
The rotating plate has 3 sets of bolt holes (see Figure 12). Use the bolts
provided to attach the rubber pad bracket to the rotating plate described
below.
• The upper set of bolt holes is for positioning the rubber pad bracket (and
attached feed chute) for both 11 and 12-inch softball use;
• the lower set of bolt holes is used for baseball, field hockey and
lacrosse.
Assembly
16
Figure 12
Figure 11
Baseball, Lacrosse
and Field Hockey
Softball
Upper Bolt Holes
Lower Bolt Holes