Konig Electronic IP baby monitor - Manual (Page 5)

ENGLISH
5
Figure 6 Figure 5
Figure 2 Figure 3 Figure 4
APPLE
Set the IP baby monitor to connect to the Wi‑Fi router
8
Open up “Settings” on your iOS device and select “Wi-Fi” and let it
search for a network. The network will be “Wi-Fi-cam-p2p”. Select
“Wi-Fi-cam-p2p” to connect.
9
Now, open the “uCare Cam” app and select the tab at the bottom of
the screen that says “Wi-Fi Connect”.
10
Select “Router mode”, then “Next”. Enter here the Wi-Fi network name
(SSID) and password of your home router.
11
After the IP baby monitor receives this information, it will restart.
Please wait for it to start up and connect to your Wi-Fi router. When it
successfully connects, the status LED colour will turn orange. It may
take up to 5 minutes.