Konig Electronic IP baby monitor - Manual (Page 7)

ENGLISH
7
Figure 8 Figure 9 Figure 10
7
IP baby monitor connects with Wi‑Fi router
Wait about 1-2 minutes. If the IP baby monitor is successfully
connected to the Wi-Fi router, the status LED will become orange.
Otherwise the status LED will become a flashing red light. If the setup
is not successful, please go back to Step 1 and try again.
8 If successful, select the tab:
(see Figure 11), and follow the instructions.
Please enter a camera name and password for security and select the
tab:
(see Figure 13).
9
The IP baby monitor will automatically enter the viewing screen (see
Figure 14).