Lab.gruppen D Series 80:4L - Manual (Page 12)

11. Product overview
12
D SERIES Lake Quick Start Guide rev 1.2.0
11. Product overview
11.1. Front panel
1
The front panel is consists of an outer front with air intake and a centered user interface. The user interface has
LEDs for monitoring and six recessed touch buttons for control.
1 Rack ears for 19 inch rack mount
2 Exterior front grille (also air intake and dust filter holder)
USER INTERFACE
Frame Status and Control
3 FRAME LED for frame related status indication
4 TEMP LED for temperature related status indication
5 PSU LED for the status indication related to Power Supply Unit or mains supply
6 POWER LED and TOUCH BUTTON for power state indication and control. Press and hold button to toggle
the amplifier between ON and STANDBY state
Channel Status and Control
7 LOAD LED for load related status indication
8 AMP LED for amplifier related status indication
9 SIGNAL LED for signal related status indication
10 MUTE LED and TOUCH BUTTON for mute status indication and control. A single touch on the mute button
toggles the power channel mute between mute and unmuted states.
11 SELECT LED and TOUCH BUTTON for selection and indication control between computer software and
unit. A single touch on the button will select the unit in supported computer software views. Multiple consecutive
touches will select the corresponding module (one touch for module A, 2 for module B etc.). In the other direction,
when selecting the unit in a supported computer software view, the LED will indicate the unit is selected.
NOTE: The touch buttons use capacitive touch technology and might be sensitive to large temperature and
humidity variations.
3 4 7 8
6 5 9 11