Lab.gruppen LM 44 - Manual (Page 17)

Signal Flow and Lake Processing
11
Lake LM Series Operation Manual Rev 1.2.8
5. Signal Flow and Lake Processing
5.1 Signal Flow
The figures below depict the audio signal flow for LM Series devices configured in both Contour and Mesa
modes. It is worth noting that this sophisticated device provides up to five points in the signal chain where
the signal level can be adjusted, muted or disconnected (depending on whether configured in Contour or
Mesa Mode as described below). The blue sections represent Frame data, and the red sections represent
Module data - please refer to the Lake Controller Operation Manual for further information.
Important information regarding correct setting of the gain structure can be found in section 9.1.
Figure 5-1: LM Series Signal Flow (Contour Mode)