Lab.gruppen LM 44 - Manual (Page 41)

Front Panel Interface
35
Lake LM Series Operation Manual Rev 1.2.8
This section of the screen displays the output routing configuration
Press this button to scroll through the available output destination types
Press this button to move the cursor to the left
Press this button to move the cursor to the right
Use the rotary encoder to toggle the selected routing point ON or OFF
Use the above function keys to navigate to the required audio source and output destination, then move the
cursor to a routing point and adjust using the rotary encoder.
▸ ‘X’ identifies a connected routing point
▸ ‘O’ identifies a currently unused and available routing point
▸ ‘
-
’ identifies that routing is unavailable for this routing point, normally because another audio channel is
already routed to the output.
All three states are shown in inverse video when they are selected by the cursor.
6.10.4 Frame Submenu
MENU > FRAME
Figure 6-21: Frame Menu
The Frame Menu provides information and options relating to the device as a physical unit. It is referred to
as a Frame for consistency with Lake Controller terminology.
6.10.4.1 Frame Info
MENU > FRAME > FRAME INFO
Frame Info provides information about the device settings and configuration. All data in this front panel
menu is read-only; some parameters are fixed, some can be changed only via the Lake Controller software.