Labconco XPert Weigh Boxes 5220331 User Manual
Page 40
Chapter 7: Accessorizing Your Glove Box
Product Service 1-800-522-7658
36
7. Balance Vibration Isolator (Part #5234600)
Included with the XPert Weigh Box. Isolates building vibration and
aids with balance weighing. Includes a 20" x 13" x 2 1/4" marble slab
with isolator pads and type 304 stainless steel top cover to protect the
porous marble.
8. Pressure Gauge for the Transfer Chamber (Part #5238100)
Kit includes the pressure gauge, hose and fittings to add to the transfer
chamber. Range 0 to 29 inches of mercury vacuum.
9. Add-A-Valve Kit (Part #5225701)
Includes the valve, O-ring, and nut to supply the main chamber or the
transfer chamber to purge vacuum, fill gas, or connect a drying train.
One each Identifier Label Set for valves (Part #5236600) is ordered
separately.
10. Vacuum Aspirator Kit
Includes the valve, hose, canister, and vacuum pump for evacuating
fluids around the work surface.
Part #
Descriptions
5241800
Vacuum Aspirator Kit, 115V
5241801
Vacuum Aspirator Kit, 230V
11. Electrical Power Strips
These convenience electrical power strips are available in US and
international versions and plug into the interior duplex of the glove
box. The 115V, 4 position, 5A US Power Strip is already included
on 115V XPert Weigh Boxes.
Part #
Descriptions
5211500
US Power Strip 115V, 4 Position, 5A
5210600
UK Power Strip 250V, 6 Position, 2A
5290400
European Power Strip 250V, 4 Position, 2A
5332600
Australian Power Strip 250V, 6 Position, 2A
5211501 Installation
Tool
12. Electrical 9 Pin Sealed Pass-Through Kit (Part #5075619)
Includes sealed 9 pin (D-subminiature with male pins on one side and
female pins on the other) connector and cord for data transfer to a
typical printer outside the glove box from the balance. Note: Order
the 9 pin installation kit separately which includes all the drill bits and
hole saws for field installation (Part #5241100).
13. Mechanical or Electrical Straight Pass-Through Kit (Part #5240700)
Provides three ID pass-through ports with sizes of .230/.395,
.230/.530, and .450/.705. Order the installation kit with drill bits
separately (Part #5240800). Useful for sealing cords and plumbing.