Labconco XPert Weigh Boxes 5220331 - Manual (Page 41)

Chapter 7: Accessorizing Your Glove Box
Product Service 1-800-522-7658 37
14. FilterMate Portable Exhausters and Filters for Secondary
Filtration (see models and filters below)
The FilterMate Portable Exhauster can successfully adsorb low level
organic vapors, formaldehyde, ammonia, and secondary particulates
via another HEPA filter.
Part # Descriptions
3970000 115V FilterMate (HEPA only included)
3970020 230V FilterMate (HEPA only included)
3970001 115V FilterMate (Carbon Filter sold separately)
3970021 230V FilterMate (Carbon Filter sold separately)
3970002 115V FilterMate w/thimble (HEPA included)
3970022 230V FilterMate w/thimble (HEPA included)
3970003 115V FilterMate Combination HEPA/Carbon (order
Carbon Filter separately)
3970023 230V FilterMate Combination HEPA/Carbon (order
Carbon Filter separately)
3970004 115V FilterMate (Two Carbon Filters sold separately)
3970024 230V FilterMate (Two Carbon Filters sold separately)
3707900 HEPA Filter for FilterMate
3923400 Organic Carbon Filter for FilterMate, 12 lbs.
3923401 Formaldehyde Carbon Filter for FilterMate, 14 lbs.
3923402 Ammonia Carbon Filter for FilterMate, 16 lbs.
3776002 Replacement Bag to Bag-In/Bag-Out HEPA Filter
15. 5" Thimble Exhaust Connector for Connection to the FilterMate
(Part #5241900)
Connects to the top of the blower on the glove box for attaching the
FilterMate Portable Exhauster. The thimble is necessary for
balancing the blower in the glove box with the FilterMate Portable
Exhauster.
16. 6" Thimble Exhaust Connection to Building Exhaust
(Part #5230200)
Provides a 6" exhaust thimble connection to the blower on the glove
box for exhausting to the outside. The thimble is necessary for
balancing the blower on the roof with the glove box blower.
17. 6" Hard Duct Connection to House Exhaust (Part #5230400)
Provides a 6" closed hard duct connection for using a roof-mounted
blower and by-passing the blower on the glove box.
18. Remote Wall-Mount Blower Kit (Part #5229800)
Provides a wall-mount bracket, 4" dia. x 6' long hose, hose clamps,
and 8' power cord for moving the blower from the glove box and
remotely mounting it to a wall within 5'.
19. 6" Exhaust Dampers
Exhaust dampers allow airflow adjustments to be made, maintaining
proper airflow to roof-mounted remote blowers or building exhaust.