Labconco FreeZone Plus 4.5 Liter and FreeZone -105 C Cascade Freeze Dry Systems 73870 Series User Manual
Page 44
Chapter 8: Modifying Your Freeze Dryer Display
Product Service 816-333-8811 or 1-800-522-7658
40
Press MENU and the display shows:
Press and hold SELECT to change the status.
Press MENU and the display shows:
Press and hold SELECT to change the status.
Press MENU and the display shows:
Press and hold SELECT to change the status.
Press MENU and the display shows:
Press and hold SELECT if you want to disable the moisture
sensor.
Press MENU and the display shows:
Press and hold SELECT to change the status
Press MENU and the display shows:
If you want to reset Total Hours, press and hold SELECT until an audible
beep is heard. The display defaults to the main freeze dry display
information.
If you do not want to set Total Hours, press MENU and the display shows:
DEFROST HEATER:
NOT INSTALLED
SHELL FREEZER:
NOT INSTALLED
HOLD SELECT TO CLEAR
ALL TOTAL HOURS?
DRYING CHAMBER:
NOT INSTALLED
PURGE VALVE:
NOT INSTALLED
MOISTURE SENSOR:
INSTALLED
PRODUCTION MENU:
MASTER RESET?