Labconco PrimeMate Oil Change System 73570 Series - Manual (Page 13)

Chapter 3: Getting Started
Product Service 1-800-522-7658 9
Fill the PrimeMate Oil Change System with Oil
Remove the cover from the PrimeMate Oil Change System by grasping the
handle and pulling straight upward.
Remove the clean oil container by unscrewing the cap and pulling the tube
assembly straight upward. The PrimeMate Oil Change System is supplied with
an empty 1 gallon (3.8 L) clean oil container. If you purchase oil in 1 gallon
containers from Labconco, the full container will fit into the PrimeMate Oil
Change System. Replace the empty supplied container with the full container.
Then replace the tube assembly and screw on the cap.
If the container holding your new oil is not identical to the supplied clean oil
container, pour oil from your container into the supplied container and replace
the tube assembly and cap.