Labconco Precise Controlled Atmosphere and Basic Glove Boxes 5220131 User Manual
Page 40
Chapter 7: Accessorizing Your Glove Box
Product Service 1-800-522-7658
36
separately. This kit can be used if additional valves are desired or
valves are added to the Precise Basic Glove Box. For a complete
installation of six valves, mounting brackets, pressure relief valve,
and labels for the Precise Basic Glove Box, order Full Valve Kit
#5232101. All valves require a 0.688" (17.5mm) diameter hole to be
drilled for mounting.
7. Vacuum Aspirator Kit
Includes the valve, hose, canister, and vacuum pump for evacuating
fluids around the work surface.
Part #
Descriptions
5241800
Vacuum Aspirator Kit, 115V
5241801
Vacuum Aspirator Kit, 230V International
8. Electrical Power Strips
These convenience electrical power strips are available in US and
international versions and plug into the interior duplex of the glove
box.
Part #
Descriptions
5211500
US Power Strip 115V, 4 Position, 5A
5210600
UK Power Strip 250V, 6 Position, 2A
5290400
European Power Strip 250V, 4 Position, 2A
5332600
Australian Power Strip 250V, 6 Position, 2A
5211501 Installation
Tool
9. Electrical 9 Pin Sealed Pass-Through Kit (Part #5075619)
Includes sealed 9 pin (D-subminiature with male pins on one side and
female pins on the other) connector and cord for data transfer to a
typical printer outside the glove box from the balance. Note: Order
the 9 pin installation kit separately which includes all the drill bits and
hole saws for field installation (Part #5241100).
10. Remote Blowers and Dampers for Exhausting the Pressure Relief
Valve and/or Vacuum Pump
Has a 1/4 hp direct drive motor and corrosion-resistant epoxy-coated
steel housing and wheel with blower inlet of 6.00" ID. Outlet
dimensions are 4.25" x 7.38" OD. Dampers allow airflow adjustment
for blowers.
CFM @ Static Pressure-Inches of H
2
O
S.P. 0.0" 0.125" 0.25" 0.50" 0.75" 0.87"
CFM
595 560 515 420 300 167
Part #
Description
4863500
Remote Blower, 115 V, 60 Hz. 4.4 amps
4863501
Remote Blower, 115/230 V, 50 Hz, 5.6/2.8 amps International
3924000
6" Epoxy-Coated Steel In-Line Adjustable Damper
4724200
6" PVC In-Line Adjustable Damper