Labconco Protector Multi-Hazard Glove Box 5065502 - Manual (Page 15)

ROUTINE MAINTENANCE
16
Fluorescent Lamp Replacement
1. Turn the light switch off and unplug the lamp power cord from the receptacle located on
the outside top of the cabinet.
2. From the top of the lamp housing, remove the two Phillips screws attaching the lamp
assembly to the top edge of the window frame.
3. Remove the lamp assembly from the unit.
4. The lamp tube can then be easily removed and replaced. Replacement lamp part #12779
(fluorescent lamp) #F30T12/CW/RS may be purchased from most local lighting supply
stores.
5. Re-install the lamp assembly and attach with the two Phillips screws. Plug in the power
cord and switch on the lamp. Refer to figure 6.
Figure 6