Laerdal HeartCode BLS 2010 - Manual (Page 9)

www.laerdal.com 9
HeartCode ® BLS Administrators Guide
“Download center” on the main section of the home page. Once
there, click “HeartCode BLS” to check the most recent version.
1. Insert DVD (or unzip the file if downloaded from
http://www.laerdal-sophus.dk) and start Setup.exe.
2. Depending on whether you have IIS or Apache
installed, the installer will present different options
for installing extra components. **
You should leave these at the default settings
unless your setup demands advanced customized
configuration, since the installer automatically
detects your setup requirements.
3. Select the installation path.
4. The next screen asks you to “enter the e-mail
address of the administrator”. Please enter the
e-mail address of the IT contact for your facility or
the program administrator.
5. During the installation you will be asked to provide
the License Server IP address.
Be aware that you will not be able to use
HeartCode BLS if the Laerdal License Server is
not available or has run out of licenses.
Enter the IP address and click the “Test
connection” button.
a. If successful, then proceed with the
steps below.
b. If not successful, consult the
“Troubleshooting” section below.
6. You can provide the name of the Virtual directory
where users will be able to connect to HeartCode
BLS. By default it is set to “HeartCodeBLSG2010”.
This means that people can connect by typing the
following address in their Internet browser.
http://(ServerAddress)/HeartCodeBLSG2010