LINK Systems OmniLink - PLC Interface - Manual (Page 43)

June 5, 2000 Man ual Rev 1 .0
5.16
0 = OK 1 = Tonnage Alarm
2 = Channel Error 3 = Vref Shorted
4 = TOTAL Alarm 5 = Machine Rating Error
6 = Peak Degree Error 7 = Peak Setpoint Error
8 = DW 1 Setpoint Error 9 = DW 2 Setpoint Error
10 = DW 3 Setpoint Error 11 = DW 4 Setpoint Error
12 = UNUSED 13 = UNUSED
14 = UNUSED 15 = Bypassed
Section 5.7.46 Parameter 046 - Tonnage Monitor Channel 2 Status
Value:
Standard Numeric
Meaning:
Same as parameter 45
Section 5.7.47 Parameter 047 - Tonnage Monitor Channel 3 Status
Value:
Standard Numeric
Meaning:
Same as parameter 45
Section 5.7.48 Parameter 048 - Tonnage Monitor Channel 4 Status
Value:
Standard Numeric
Meaning:
Same as parameter 45
Section 5.7.49 Parameter 049 - Tonnage Monitor Number of Channels
Value:
Standard Numeric
Meaning: