LW Measurements WB 10000 - Manual (Page 16)

!!
!!
!!
Step1: Connect the cable to the load cell and plug the metal connectors under power off condition.
!
!
!
!
!
Step 2: Adjust the four scale feet horizontally.
!
!
!
!
!
!
!
!
!
!
!
!
3.6 Calibrating the weighing machine
!
Since the Earth’s gravity is not the same everywhere, each balance must be adjusted to compensate for
the gravity differences at each location in accordance with the underlying physical weighing principles.
This adjustment process, known as calibration and must be carried out on initial installation and after
each subsequent relocation.
! 16