Dell PowerVault 3000i - Manual (Page 57)

Setting Up Your iSCSI Storage Array
57
SESSION STATUS : ESTABLISHED AT Wed May 9 18:20:28 CDT 2007
SESSION ID : ISID 00023d000002 TSIH 4
*******************************************************************************
Viewing the status of your iSCSI connections
In MD Storage Manager, clicking the iSCSI tab and then Configure iSCSI Host Ports will show the
status of each iSCSI port you attempted to connect and the configuration state of all IP addresses. If
either displays Disconnected or Unconfigured, respectively, check the following and repeat the iSCSI
configuration steps:
• Are all cables securely attached to each port on the host server and storage array?
• Is TCP/IP correctly configured on all target host ports?
• Is CHAP set up correctly on both the host server and the storage array?
To review optimal network setup and configuration settings, see Guidelines for Configuring Your Network
for iSCSI.