Pitney Bowes DM575 Series - Manual (Page 157)

DM525™ and DM575™ Series Digital Mailing System Operating Guide
SV62201 Rev. C 9 - 3
Tape is still on
roll 1. When you see the red stripe on the tape, go to the Tape Maintenance
screen:
a. Press the Menu key.
b. Select Maintenance.
c. Select Load Tape.
d. Select Unload Tape.
2. If your DM Series™ Digital Mailing System does not have the optional
WOW® module, open the feed cover and remove the tape roll.


If your DM Series™ Digital Mailing System has the optional

Weigh-On-The-Way® (WOW®) module, open the WOW® cover.
Refer to the appropriate figure below.
Location of the tape roll
under the feed cover on a
DM525™ or DM575™

system without the optional
WOW® module.
DM525™ or DM575™ Series Digital Mailing System
Location of the tape roll
under the WOW® cover on
a DM525™ or DM575™
system with the optional
WOW® module.
DM525™ and DM575™ Series Digital Mailing System

with the optional WOW® module