Pitney Bowes DM575 Series - Manual (Page 81)

DM525™ and DM575™ Series Digital Mailing System Operating Guide
SV62201 Rev. C 5-17
Phone/Network
Set Up:
Secondary PB # This feature may be offered as a standard or optional feature and is not
available on all Pitney Bowes solutions. Please contact your local account
representative to determine if this option is accessible on your system.
Use this option to enter a secondary or alternative Pitney Bowes phone
number to dial if the first or primary number is busy.
1. Press the Menu key on the control center. Select Set Up from the main
screen, then select Phone/Network Set Up.
2. Select Secondary PB #. This number is supplied by your Pitney
Bowes representative.
3. Use the numeric keypad to enter the phone number you need to dial to
perform add postage.
4. Press the Enter key.
Phone/Network
Set Up: My
Phone # Use this option to enter your local phone number (the number to which your
mailing system is connected).
1. Press the Menu key on the control center. Select Set Up from the main
screen, then select Phone/Network Set Up.
2. Select My Phone #.
3. Use the numeric keypad to enter your local phone number. Be sure and
include the area code with your number. Also, use only digits and do
not include spaces or dashes.
4. Press the Enter key.
Phone/Network
Set Up: Modem
Type Use this option to select the modem type: USB, Serial, or Internal.
1. Press the Menu key on the control center. Select Set Up from the main
screen, then select Phone/Network Set Up.
2. Select Modem Type and the "Select Modem Type" screen appears.
3. Select the appropriate modem type (USB, Serial, or Internal). The
Phone/Network Set Up screen reappears.
4. In order for this change to take effect you must restart your system. Use
the On/Off switch located on the base of your machine to restart your
system (see Mailing System Exterior section in Chapter 2 of this guide
for the location of the On/Off switch).