Raloy IP Functions for KVM - Manual (Page 17)

14
Color Depth
Set the desired color depth. You may select between 8 or 16 bit for Video Optimized/compression
level 0, or between 1 and 8 bit for compression level 1 to 9. The higher the color depth, the more
video information has to be captured and to be transferred.
Note: If displaying motion pictures on a connection with low speed you may achieve an
improvement regarding the video transfer rate by lowering the color depth and disabling the option
“Video Optimized”. As a general result, the data rate is reduced (less bits per color). Furthermore,
the OPMA module will not have to do any video compression. In total, this will lead to less transfer
time of the motion picture.
2-4.2 Remote Console Status Line
Status line
Shows both console and the connection state. The size of the remote screen is displayed. The image below
was taken from a Remote Console with a resolution of 800x600 pixels. The value in brackets describes the
connection to the Remote Console. “Norm” means a standard connection without encryption, “SSL” means
a secure connection.
Furthermore, both the incoming (“In:”) and the outgoing (“Out:”) network traffic are visible (in kb/s). If
compressed encoding is enabled, a value in brackets displays the compressed transfer rate.
For more information about Monitor Only and Exclusive Access settings, see related
sections