Raloy IP Functions for KVM - Manual (Page 34)

31
SMTP Logging enabled
With this option, the IP module is able to send Emails to an address given by the Email address text field
in the Event Log Settings. These mails contain the same description strings as the internal log file and
the mail subject is filled with the event group of the occurred log event. In order to use this log destination
you have to specify a SMTP server, that has to be reachable from the IP module device and that needs
no authentication at all (<serverip>:<port>).
SNMP Logging enabled
If this is activated, the IP module sends a SNMP trap to a specified destination IP address, every time a
log event occurs. If the receiver requires a community string, you can set it in the appropriate text field.
Most of the event traps only contain one descriptive string with all information about the log event. Only
authentication and host power events have an own trap class that consists of several fields with detailed
information about the occurred event. To receive this SNMP traps, any SNMP trap listener may be used.
Here is a example of all gerenated event and its event group.
Device succesfully started device
Board Reset performed by user... device
Firmware upload failed. device
No firmware file uploaded. device
Uploaded firmware file discarded. device
Firmware validation failed. device
Firmware file uploaded by user... device
Firmware updated by user... device
Internal log file cleared by user... device
Security Violation security
Host Power host
Host Reset host
Connection to Remote Console failed: reason. console (several)
Connection to client ... established. console
Connection to client ... closed. console
Login failed. auth
Login succeed. auth
Warning
In contrast to the internal log file on the IP module, the size of the NFS log file
is not limited. Every log event will be appended to the end of the file so it grows
continuously and you may have to delete it or move it away from time to time.