Rocktron Piranha - Manual (Page 17)

14
Setting up the All Access for remote operation
Refer to the All Access ™ user's manual for detailed information on editing the All Access ™ .
ΠSet the Operating Mode to "REMOTE".
 Set the Bank Size to "10".
Ž Reinitialize only the controller information for the instant access switches and
pedals using a reinitialization code of "231".
 Set the Operating Mode to "REMOTE".
When operating in Remote mode with a Piranha, switches 1-10 act as normal preset switches, while switches 11-14
provide specific functions, as illustrated below.