Rocktron Piranha - Manual (Page 18)

15
6. Special Functions 6. Special Functions
Some Piranha functions are available which require special instructions to access. These functions include Factory
Preset Reinitialization, Continuous Controller mode and MIDI Preset Dump/Load, and are discussed in this section.
A. Factory Reinitialization
The Factory Reinitialization function allows for all Piranha presets to be restored to their original condition as
shipped from the factory.
! WARNING !
This procedure will erase all user-modified presets and
replace them with the original factory presets.
ΠTurn the unit off.
 With the unit turned off, press and hold the DOWN and CLEAN buttons.
Ž While holding the DOWN and CLEAN buttons, turn the unit on. All Piranha
presets will be reinitialized to their original factory status.
Note: When Preset Reinitialization is initiated, the STORE button will blink. After
preset reinitialization is complete, the Piranha will complete its normal power-up
routine and recall preset number 1.
* * * * To cancel the Factory Reinitialization procedure, press the GLOBAL button twice. * * * *