Controls and function descriptions – Rocktron Mike Orlando Signature Wah User Manual

Page 9

Advertising
background image

ROCKER FOOTPEDAL - Place your foot on the rocker foot-

pedal and rock it up and down (toe to heel - heel to toe) to work

the “ wah” effect.

Wah ON/OFF Switch - is located under the toe of the rocker

footpedal. To activate the “wah” press down slightly harder on

the toe of the rocker pedal until the switch is activated. The

same process is to be applied to turn off the wah effect. The

wah effect will be on when the red LED is lit (see point 7).

WAH TYPE Selector Control - This control will allow you to se-

lect 3 different wah models - Bass, Classic or Normal.

o

BASS - in this position the wah has been voiced to use with a bass or

dropped tuned guitars and 7-strings. It also provides a different dimen-

sional tone for 6-string guitars in standard tunings.

o

CLASSIC - in this position the wah voice is changed to a more “vin-

tage” wah tone. Mike uses this position most when playing.

o

NORMAL - in this position the wah is voiced to sound like a “tradi-

tional” wah.

WAH MIX Control - This control allows you to mix in the

amount of wah effect to the dry signal. When turned full to the

“WAH” side the wah effect is 100% in the signal. When turned

full to the “Clean” side the wah effect is at the minimum amount

mixed in. When the control is at 12 o’clock the wah effect and

dry signal is 50/50

1

2

3

4

Controls and Function Descriptions

Advertising