Speck Electronics Xtramix - Manual (Page 31)

When the Bus/Line Switch on the monitor channel is selected to the Bus
(subgroup) position, this control acts as a traditional left/right pan for the
stereo Program, Monitor, and Headphone outputs.
When the Bus/Line Switch is selected to the Line position, the
Pan/Balance Control acts as a left/right balance control for an incoming
stereo line signal.
Depressing this switch allows you to isolate any monitor channel to the
Monitor and/or Headphone outputs while maintaining stereo
perspective. The source for the In-Place solo circuit is post (after) the
volume control, this allows you to solo multiple monitor channels while
retaining their relative levels.
Depressing this switch deletes the Bus/Subgroup signal from the
Monitor, Program and Headphone feeds, although its associated
bus/subgroup output will remain unaffected by the operation of this
switch. When the channel's Bus/Line Switch is selected to the Line
position the Mute Switch will delete the stereo line signal.
This dual colored LED indicates the status of the channel's Solo and
Mute switches. When the Mute switch is depressed, the LED will
illuminate green in color. When the In-Place Solo switch is depressed,
the LED will illuminate red in color.
27. Monitor Pan/Balance Control
28. Monitor Solo Switch
29. Monitor Mute Switch
30. Solo/Mute LED
26 Chapter 4 Operation Section