Speck Electronics Xtramix - Manual (Page 9)

The master section provides the Xtramix with many choices for routing
and controlling the line signals from the input section and effects
devices from the effects section.
The master section includes 8 discrete subgroup level controls, a stereo
program, stereo monitor, and stereo headphone controls. A stereo cue
and stereo aux return allow a variety of signals to be mixed with the
synth signals to the monitor and headphone outputs. The master section
provides a full compliment of balanced 1/4" TRS input and output
connectors that allow the Xtramix to adapt to a wide range of
professional situations.
• Twenty balanced stereo inputs may individually operate as mono input
channels.
• Input channels offer high and low operating levels.
• Eight stereo effects returns with individual mono switching.
• Eight assignable subgroups available for all input channels and effects
returns.
• Effects send outputs have summing points so that other mixers' aux
outputs may be combined with the Xtramix sends.
• The solo circuit for input channels, effects returns and monitor section
can feed headphones only or both headphones and monitor output.
• A separate tuner output follows the solo for quick isolation.
The Xtramix is supplied with an external rack mount Model PS3-1.5
regulated power supply that is capable of powering the Xtramix.
The PS3-1.5 power supply is supplied with a IEC power entry
connector, a 3 conductor AC power cord, and a 6 foot DC cable. The
DC cable has a 6 pin connector at one end that plugs into the power
supply, and a 4 pin connector at the other end that plugs into the
Xtramix. The cable may be secured to the rear chassis of the Xtramix
for a positive connection.
Master section
Features
Standard Accessories
Regulated power supply
4 Chapter 1 Introduction Section