SpectraCal VirtualForge Software - Manual (Page 8)

17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
3. On the CalMAN Source Settings tab, click Find Source.
4. From the Manufacturer drop-down, select ‘SpectraCal.’
5. From the Model drop-down, select ‘SpectraCal - VirtualForge (Ethernet @9022).’
6. Either select the desired VirtualForge IP address from the bottom search box or type in the
VirtualForge IP address, from the VirtualForge About page, then click Connect.
As you proceed through your selected workflow, whenever display measurements or adjustments are
performed, CalMAN controls the VirtualForge software to produce the required test pattern.