SpectraCal CalMAN DPG-2000 - Manual

17544 Midvale Ave. N., Suite #100 Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
CalMAN DPG-2000
Digital Pattern Generator
Quick Start Guide
1. Identify the parts.

The smaller box with a USB cable is an IR
Controller. It is an infrared transceiver
that plugs into your computer to allow
CalMAN to remotely control the DPG-2000.

The larger black box is the DPG-2000
itself.

The USB flash drive and the power supply
connect to the DPG-2000, as explained
below.
2. Insert the supplied USB flash drive into the
rear USB port on the DPG-2000.
3. Connect the DPG-2000 power.
Plug the power supply into the DPG-2000 and connect the supply to AC power.
4. Connect the DPG-2000 HDMI output to your display input.
You can use the HDMI cable provided.