SpectraCal Panasonic AX900 - Manual

17544 Midvale Avenue N., Suite 100, Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
Panasonic
AS800/AX800/AX900 2014 Models
CalMAN Setup Guide
For the Panasonic models listed above, CalMAN automatically calibrates the display’s two point
grayscale controls, the 10 point grayscale controls, and the CMS color gamut controls.
Also, the display’s two custom picture modes, Professional 1 (ISF Day) and Professional 2 (ISF
Night), can each be calibrated with individual picture menu adjustments, grayscale adjustments,
and CMS adjustments.
Recommended CalMAN Workflows:

HT Advanced, SI Advanced, or ISF Calibration workflow to optimize Picture controls
and calibrate two point and 10 point grayscale RGB balance controls and CMS color
gamut controls.
Required Panasonic Firmware:

All firmware versions supported
Panasonic Control Connection:

Wireless (Wi-Fi) connection
Note: The Panasonic models listed above support only wireless calibration control, not
through the display’s Ethernet connector.
Panasonic Setup Process:
To enable the display’s ISFccc Viewing Mode:
1. In the Panasonic Setup menu, select Professional Mode (isfccc).
2. Select On.
To connect the CalMAN calibration computer to a display listed above, through a wireless
(Wi-Fi) network:
1. In the Panasonic Network menu, select Network Status.
2. If a connection to a network router is indicated, select Status Details.
3. Under Network Status Details, note the Network Name to which the display is
connected and note the display’s IP Address.
4. If no network connection is indicated, in the Panasonic Network menu, select Network
Connection.
5. Under Network Connection, select Quick Setup, and wait for the display to search for
available Wi-Fi routers (the Wi-Fi router does not require an internet connection).
6. In the list of available Wi-Fi routers, select the router to which you wish to connect
the display (may require a security password).