I1pro enhanced calman setup guide – SpectraCal X-Rite i1Pro User Manual
Page 2
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
i1Pro Enhanced
CalMAN Setup Guide
1. Download and install the CalMAN Device Driver Kit
A. Browse From the navigation bar at the top of the page,
choose Downloads and select Other Downloads.
B. From the Downloads page, under "Other Resources," find Device Driver Kit, and
press the Download Now button. (You may need to answer security prompts from
your web browser to verify that you wish to download a file.)
C. Choose Run from the download prompt or double-click on the Device Drivers msi
file to install the device driver kit.
2. Plug the i1Pro into a USB port in your system and install the driver.
When you plug in your i1Pro, Windows will pop up a Found New Hardware
Wizard. To the prompt "What do you want the Wizard to do," select the
option, "Install from a list or specific location." Use the Browse button to locate
the directory where you installed the Device Driver Kit, then select the i1Pro
directory. The Typical location will be “C:/Program
Files/Spectracal/Drivers/i1Pro or when installed on a Windows 64 bit computer
the location will be C:/Program Files(x86)/Spectracal/Drivers/i1Pro”
Windows7 does not prompt for driver installation when a device is first
attached. In order to install the drivers, go to Start/Control Panel, choose
System and then choose Device Manager on the left hand side of the System
Properties window.
3. Start CalMAN and select the i1Pro.
In the CalMAN V4 software, on the right side bar, select Settings and then
Meter Settings. If this is the first time using the i1Pro on this PC you will need
to select the search button, then click search on the pop up box. Once the pop
up box is finished searching you will be able to click on the meter drop down
box, and you will see the i1Pro in the list. You will also want to select the
proper display type to match the display you are calibrating.