SpectraCal X-Rite i1Pro 2 - Manual (Page 3)

17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
X-Rite i1Pro 2 Enhanced Spectrophotometer
CalMAN Setup Guide
USB Driver
 X-Rite driver, available as part of CalMAN Device Driver Kit
CalMAN does not require the installation of any X-Rite software (e.g. i1Profiler).
NOTE: The X-Rite i1Profiler program captures meter (X-Rite services)
CalMAN Connection Procedure
1. On the Meter Settings page, click Find Meter.
2. On the Find Meters popup dialog:
a. Leave Com Port set to auto
b. Leave meter search options set to default
c. Click Search
Meter Settings Options
Meter Modes (Target Display Types)
 LCD Direct View
 LCD Front Projector (facing projector)
 LCD Front Projector (facing screen)
 LCD Rear Projector
 LCoS Front Projector (facing projector)
 LCoS Front Projector (facing screen)
 LCoS Rear Projector
 SXRD Front Projector (facing projector)
 SXRD Front Projector (facing screen)
 SXRD Rear Projector
 CRT Direct View
 CRT Front Projector (facing projector)
 CRT Front Projector (facing screen)
 CRT Rear Projector
 Plasma
 DLP Front Projector (facing projector)
 DLP Front Projector (facing screen)
 DLP Rear Projector
 Ambient Light
 Reflectance (Internal Lamp
Select the Meter Mode that corresponds to the display you wish to measure or
calibrate.