SpectraCal Panasonic 2013 WT600 - Manual (Page 3)


Picture/Color Balance – Select WARM 1 for color temperature closest to the D65 target.

Picture/Color Gamut – Select Rec. 709 for HD calibration.

Picture/Advanced/Gamma – Select 2.2 or 2.4 to test for best performance to selected target.

Picture/Advanced/White Balance – adjust the display’s Gain and Cutoff controls to get the
white balance tracking close to target before adjusting the White Balance multipoint controls.
This can be done manually, or with AutoCal on the “Grayscale – 2 pt” step in the CalMAN
Advanced or ISF Calibration workflow.
CalMAN AutoCal™:

To calibrate grayscale tracking and CMS on these displays, it is best to perform AutoCal on these
three CalMAN workflow steps, in this order:
1. Grayscale – 2pt
2. Grayscale/Gamma
3. CMS Calibration

After AutoCal is complete, optimize the display’s Brightness control for the local viewing
conditions.
CalMAN Disconnect Procedure
To disconnect CalMAN from the Panasonic display:

On the CalMAN Display Control tab, click Disconnect.