SpectraCal Panasonic BT300 - Manual (Page 3)

Panasonic Picture controls are available within the CalMAN software, allowing you to make display
adjustments in the software, rather than using the display’s remote control. On those calibration
workflow steps where you need to make a manual display adjustment (e.g. Brightness, Contrast,
etc.), you can open the CalMAN DDC panel to make those adjustments from the CalMAN screen.
Panasonic Display Calibration:

Picture Mode – Select MONITOR for most accurate picture levels.

Color Temp – Select WARM for color temperature closest to the D65 target.

Advanced Settings/Black Extension – Set to 0.

Advanced Settings/Input Level – Select 0.

Advanced Settings/Gamma – Select 2.2 or 2.4 to test for best performance to selected target.

Advanced Settings/Studio Gain - Select OFF.

Advanced Settings/Color Gamut - Select BT.709 for standard HD color space.