SpectraCal VMWare Fusion User Manual
Page 3
17544 Midvale Ave. N. Ste 100, Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
3. On Fusion screen, click the Play button to start Windows in the Fusion virtual machine.
4. Connect any USB calibration device hardware to the Mac computer.
On the Fusion Settings page:
Click USB & Bluetooth.
A. Under Connect USB Devices, check the box for each USB device you wish to connect to
Windows.
B. For those same USB devices, under Plug In Action, select Connect to Windows.
C. Under Advanced USB Options / USB Compatibility, select USB 2.0.
Additional Notes
1. To allow external IP connections from CalMAN, disable any Windows firewall on the
CalMAN virtual Windows machine. A firewall should be enabled, however, on the host
computer (Mac or Linux OS).
2. After you have the Windows virtual machine properly configured, you may wish to save
a snapshot of the virtual machine configuration. To do this, click the Snapshots button
on the Fusion Virtual Machine Library page.
3. When you wish to connect CalMAN to Client 3 that is installed on the host Mac
computer, or on another computer that you wish to calibrate, be sure that you don’t
accidentally connect to Client 3 within the Windows virtual machine.
To avoid this mistake, Client 3 should not be installed on the Windows virtual machine.