Synchronization, Low voltage detection – Star Headlight & Lantern 5400 Series 46" LED Packages User Manual
Page 11
-8-
Synchronization
You can synchronize up to six total approved lights.
If you will be synchronizing your light with any of our products, please note the
following:
• All units that are to be synchronized MUST have the same Pattern Type.
• To check pattern compatibility with other products, review the Pattern List for
each product, noting the Pattern Type. Certain patterns are compatible with some lights,
but not compatible with others.
• Programmable Flash Patterns can vary between our different lights, but Pattern Types F,
G, H, I, & J are fully compatible patterns with ALL of our other products.
• Program the Pattern(s) for each light PRIOR TO connecting the synchronization
wires together.
• All Synchronized Units must be switched ON/OFF by the same power switch.
The S8070-346-2**circuit, used in these lightbars (excluding the Amber Value versions), has Low Voltage
Detection. With this feature the circuit senses the input voltage and flashes a fast pattern (approximately
16 cycles per second) to indicate to the user that the battery voltage has dropped below 10V). Once the
input voltage returns to normal (greater than 12V) the unit will return to the normal flashing.
Low Voltage Detection