Star Headlight & Lantern ULB48 Lineum Dual-Color Traffic Director Interior LED Lightbar - Manual (Page 3)

-2-
P30073-4
#8 FLAT WASHER
Mounting (CONT'D)
1. Insert a carriage bolt through
one of the 1/4” washers and
slide it through the back of each
of the brackets. Please note
that washer is used as a spacer
on the square neck of the
carriage bolt.
2. Remove two of the #8 x 1/2" self-tapping
Phillips pan head screws on one side of the
light. Using the #8 washers enclosed and
assemble as shown to the left.
CAUTION: Take extreme caution not to
over tighten the screws!!!
3. Place one of the forked “L”
brackets on the bolt and secure it
with one of the nuts. Note:
There are two different style
forked brackets included. Use
the one that suits your
application best. Leave the nut
slightly loose to allow for minor
adjustments during the
remainder of the installation.
Corner Post Brackets
Forked Brackets
This light is designed to be mounted in the rear window of a vehicle using both the forked
brackets and the corner post brackets. Failure to use both brackets could result in a
faulty mount and will void the warranty. If your vehicle is not compatible with these
brackets you must custom design mounting brackets
.
FORKED BRACKET INSTALLATION