Programming options – Directed Electronics 3000ESP User Manual

Page 14

Advertising
background image

10

©

1999 Directed Electronics, Inc.

Programming Options

Programming options control what your system does during normal

operation, and require little or no additional parts. However, some

may require additional installation labor.

The following list of program settings shows the defaults in Bold:

Passive mode or active mode. In passive mode the Failsafe

Starter Kill relay will be automatically activated 30 seconds

after the ignition key is turned off.

Both the ignition switch-controlled door lock and unlock fea-

tures can be turned on or off. If ignition door lock is on, the

vehicle's doors will lock three seconds after the key is turned

on. If ignition door unlock is on, the vehicle's doors will

unlock when the key is turned off.

Passive door locking (with passive arming) or active door

locking (only when arming with the transmitter). This feature

only works if passive arming has been turned on.

The locking and unlocking horn honk confirmations can be

programmed on or off. The vehicle’s horn must be connected.

Domelight supervision when the key is turned off can be pro-

grammed on or off. If programmed on, the domelight will turn

on for 30 seconds each time the ignition is turned off.

Advertising