SurgeX SX-AX20 - Manual (Page 20)

Page 19
SX-AX15 (20) User Manual
VI. Command Line Interface (CLI) Protocol
(continued)
Group Commands
Command
Description Admin Fact Def
get groups Returns a list of the groups that the current user has rights
to. No
get group <groupname> Returns the details of the selected group. No
set group <groupname> <on | off | cycle> Controls the selected group. No
add group <groupname> Adds a new group. 20 characters max. Up to 8 groups
maximum. Yes
set group <groupname> device <#1 ‐#16 | devname | all>
outlet <1 ‐8 | all> <yes | no>
Adds or removes a specific outlet on a specific device
from the selected group. Yes
ren group <groupname> <newname> Renames the selected group. 20 characters max. Yes
del group <groupname> Deletes the selected group. Yes
Network Commands
Command
Description Admin Fact Def
get network Returns the network settings. Yes
set ipmode <arp ‐ping | static | dhcp> Set the IP Mode of the root Axess. Yes ARP-Ping
set ipaddress <dotted decimal> Set the root Axess IP Address in dotted decimal. Yes 192.168.0.254
set subnet <dotted decimal> Set the root Axess subnet mask in dotted decimal. Yes 255.255.255.0
set gateway <dotted decimal> Set the root Axess gateway in dotted decimal. Yes 0.0.0.0