Autoping commands, Email commands, Vi. command line interface (cli) protocol – SurgeX SX-AX20 User Manual
Page 22: Continued)
Page 21
SX-AX15 (20) User Manual
VI. Command Line Interface (CLI) Protocol
(continued)
AutoPing Commands
Command
Description
Admin
Fact Def
get autoping <1
‐16>
Returns the settings and state of the selected autoping.
Yes
set autoping <1
‐16> ipaddress <dotted decimal>
Set the IP address of the selected autoping in dotted
decimal.
Yes
0.0.0.0
set autoping <1
‐16> action <action>
Set the action of the selected autoping. On-Follow, On-
Latch, Off-Follow, Off-Latch, Cycle, Cycle-Once, or None.
Yes
None
set autoping <1
‐16> frequency <1‐999>
Set the frequency of the selected autoping in seconds.
Yes
10
set autoping <1
‐16> count <1‐99>
Set the number of failures the selected autoping requires
before it triggers its action.
Yes
3
set autoping <1
‐16> device <name | #1‐16> outlet <1‐8>
Assign an autoping to either a device/outlet or group.
Each autoping can be assigned to one or the other.
Yes
set autoping <1
‐16> group <name>
Yes
Email Commands
Command
Description
Admin
Fact Def
set email enable <yes | no>
Enables or disables the email reporting system.
Yes
No
get email
Returns the current settings of the email client of the root Axess.
Yes
set email server <dotted decimal>
Set the IP address of an SMTP or ESMTP server.
Yes
0.0.0.0
set email address <return address>
Set the return address of the root Axess email client.
Yes
0.0.0.0
set email username <username>
Set the user name for the mail server.
Yes
0.0.0.0
set email password <password>
Set the password for the mail server.
Yes
0.0.0.0
set email retry <1
‐999>
Set the number of retries for failed email reporting.
Yes
3
send test mail <username>
Send a test email to the selected user.
Yes