Viii. email notification – SurgeX SX-AX20 User Manual
Page 30
SX-AX15 (20) User Manual
Page 29
VIII. Email Notification
Email can be automatically sent for outlet changes, AutoPing triggers, voltage alarms, and
current alarms. The necessary parameters for email are set using the Telnet / Serial Interface:
set email server <dotted decimal>
set email address <return address 64 char max>
set email username <user name 128 char max>
set email password <password 128 char max>
Each user is assigned an email address, and email can be enabled or disabled for that user:
set user <name> email <email address 64 char max>
set user <name> sendmail <yes | no>
Email generated by the Axess will display the device, outlet(s) command, and the user and
method of control.
Examples:
Subject : Power Switch: Cabinet_1
Date : Mon, 9 Jul 2012 09:41:00 - 0500
From : <[email protected]>
To
Location: Cabinet_1
Outlets:
5 Server_B
Command: Cycle
User: admin
Source: Telnet
Subject : Power Switch: Cabinet_3
Date : Mon, 9 Jul 2012 09:46:00 - 0500
From : <[email protected]>
To
Location: Cabinet_3
Outlets:
3 Router_A
6 Router_B
Command: Off
User: admin
Source: Web