Ubiquiti Networks airFibe5 - Manual (Page 20)

18
airFiber® AF-5/AF-5U Quick Start Guide
Pole-Mounting
1. Attach the Azimuth Support Brackets to the pole just beneath
the area where the airFiber radio will be attached.
Note: The mounting assembly can accommodate a
Ø 38.1 - 101.6 mm (1.5" - 4.0") pole.
a. Orient the Azimuth Support Brackets around the pole so it is
aimed in the direction of the other airFiber radio.
b. Slide the open slot of the Azimuth Support Bracket over the
corresponding M10x100 Carriage Bolt.
c. Tighten the M10 Serrated Flange Nuts to approximately
50 N-m.