Ubiquiti Networks airFibe5 - Manual (Page 30)

28
airFiber® AF-5/AF-5U Quick Start Guide
3. Master Visually aim the Master at the Slave. To adjust the
Master's position:
a. Rotate the airFiber radio on the pole to align the azimuth.
b. Use the hex nut on the Elevation Rod to adjust the elevation.
Note: Do NOT make simultaneous adjustments on the
Master and Slave.
4. Slave Visually aim the Slave at the Master. To adjust the Slave's
position:
a. Rotate the airFiber radio on the pole to align the azimuth.
b. Use the hex nut on the Elevation Rod to adjust the elevation.
5. Check to see if a link is established. Ensure that the Link Status
LED is solidly lit green and the Remote and Local LED Displays of
the Slave are displaying signal levels.
GPS
MASTER
LINK
RESET
OVERLOAD
6X
8X
4X to 0.25X
REMOTE
LOCAL
AUX MANAGEMENT DATA
ACT SPEED ACT SPEED