Ubiquiti Networks airFibe5 - Manual (Page 25)

23
Connecting Ethernet
Connecting Ethernet
1. Push the button and slide the port cover down to access
cable ports. (The port cover cannot be completely removed.)
2. Connect the Data/PoE Ethernet cable:
a. Feed an outdoor, shielded CAT6 cable up through the
rightmost cable feed slot on the bottom of the port cover.
b. Connect the cable to the Data port.
c. Create a strain relief for the Ethernet cable by feeding a
Cable Tie through the tie slot to the side of the cable.
d. Wrap the Cable Tie around the cable and tighten.
GPS
MASTER
LINK
RESET
OVERLOAD
8X
6X
4X to 0.25X REMOTE
LOCAL MANAGEMENT DATA AUX
ACT SPEED ACT SPEED