Ubiquiti Networks airFibe5X - Manual (Page 10)

6
Chapter 1: Installation airFiber ® AF-5X User Guide
Ubiquiti Networks, Inc.
Mount to an Antenna
The AF‑5X can be mounted to an airFiber X antenna or an
airFiber X converted RocketDish. The airFiber X Antenna
(AF-5G30-S45) is shown in the following steps:
1. Attach the AF‑5X to the mounting bracket.
a. Align the mounting tabs on the back of the AF‑5X
with the mounting bracket.
b. Slide the AF-5X down to lock it into place.
2. Attach the RF cables from the antenna feed to the RF
connectors on the AF‑5X in this combination: +45° to
Chain 0 and -45° to Chain 1.
3. Attach the External GPS Antenna to the RF connector
labeled GPS. Then, place the magnetic External GPS
Antenna on the bracket (this is temporary; you will
mount the External GPS Antenna on the GPS Antenna
Mount at the site).
4. Attach the protective shroud.
a. Align the hash mark on the top of the shroud with the
notch on the dish antenna.
b. Rotate the shroud clockwise until it locks into place.