UVP 81-0357-01 PCR Hoods - Manual (Page 2)

PCR Workstations and Cabinets Page 2
Introduction
The UV1 and UV2 PCR Hoods create an ideal environment for preparing PCR and other samples
by reducing the chance of contamination. The built-in high intensity shortwave (254nm) UV
provides a source for inactivation of DNA between experiments. Additional contamination control is
provided by the specially-coated stainless steel and aluminum design that maintains antimicrobial
efficacy. The surface resists growth of destructive bacteria, molds and fungi. The Makrolon
® panel
assembly blocks UV below 400nm.
In addition to the UV1/UV2 PCR Hood features, HEPA/UV3 PCR Hoods provide additional
protection by blowing filtered air, treated by the HEPA/UV system, into the PCR chamber.
The UV/Air Circulator, included as standard on UV2 and HEPA/UV3 PCR Hoods and optional on
the UV1 PCR Workstation (95-0367-xx only), eliminates amplicons of DNA or genomic DNA from a
previously-dispensed experiment. For ordering information, refer to the “Maintenance and
Replacement Parts/Accessories” section.
Safety Information
The PCR Hoods are designed with functionality, reliability and safety in mind. The Hoods provide
shortwave (254nm) UV which is a powerful source of UV radiation that will cause damage to
unprotected eyes and skin. Before operating, ensure that all personnel are properly protected and that
the instructions for the use of this equipment are followed. A safety shut-off switch automatically turns
off the UV light when the door is open, protecting users from UV exposure. In addition, the Makrolon
®
panels are specially formulated to block UV wavelengths below 400nm.
Disconnect the power supply before assembling or servicing the PCR Hoods.
Specifications
STANDARD UV (UV1 and UV2) PCR MODELS
UV1 PCR Cabinet UV2 PCR Cabinet UV1 PCR Workstation UV2 PCR Workstation
95-0437-01 115V
95-0437-02 230V UK
95-0437-04 230V Euro
95-0437-03 100V 95-0436-01 115V
95-0436-02 230V UK
95-0436-04 230V Euro
95-0436-03 100V 95-0367-01 115V
95-0367-02 230V UK
95-0367-04 230V Euro
95-0367-03 100V 95-0439-01 115V
95-0439-02 230V UK
95-0439-04 230V Euro
95-0439-03 100V
Light Sources:
254nm 8-watt UV:
 Chamber
White 8-watt
 Chamber
Light Sources:
254nm 8-watt UV:
 Chamber
 UV/air circulator
White 8-watt:
 Chamber
Light Sources:
254nm 25-watt UV:
 Chamber
White 15-watt:
 Chamber
Light Sources:
254nm 25-watt UV:
 Chamber
254nm 8-watt UV:
 UV/air circulator
White 15-watt:
 Chamber
Features include:
Two power outlets
Two small shelves
UV Timer
Antimicrobial coated
stainless steel (work
surface) & aluminum
Makrolon
®
panels
block below 400nm
Features include:
Two power outlets
Two small shelves
UV Timer
Antimicrobial coated
stainless steel (work
surface) & aluminum
Makrolon
®
panels block
below 400nm
UV/Air Circulator
Features include:
Four power outlets
Two shelves
UV Timer
Antimicrobial coated
stainless steel (work
surface) & aluminum
Makrolon
®
panels block
below 400nm
Optional: UV/Air Circulator
Features include:
Four power outlets
Two shelves
UV Timer
Antimicrobial coated
stainless steel (work
surface) & aluminum
Makrolon
®
panels block
below 400nm
UV/Air Circulator
Dimensions:
Exterior: 28.7H x 21.4W
x 24D in.
(729 x 544 x 610 mm)
Interior: 19.7W x 21.4D
in. (500 x 544 mm) Dimensions:
Exterior: 28.7H x 21.4W
x 24D in.
(729 x 544 x 610 mm)
Interior: 19.7W x 21.4D
in. (500 x 544 mm) Dimensions:
Exterior: 28.7H x 29W x
24D in. (729 x 737 x 610
mm)
Interior: 27.8W x 21.4D
in. (706 x 544 mm) Dimensions:
Exterior: 28.7H x 29W x
24D in. (729 x 737 x
610 mm)
Interior: 27.8W x 21.4D
in. (706 x 544 mm)