14 m5, Attaching the handlebar bracket – VDO M5WL User Manual

Page 14

Advertising
background image

14

M5

90°

3

3

4

4

1

2

1

Attaching the handlebar bracket

You can attach the computer to the right or left of
the handlebars or in the centre on the stem. Attach the
handlebar bracket in the corresponding position.

STEP 1

Decide whether you want to attach the computer to the
handlebars or the stem.

STEP 2

Rotate the foot of the handlebar bracket by 90° accordingly.
To do so, undo the screws in the bracket, remove the foot and
rotate it 90° then insert and tighten the screws again.

Attention:

do not overtighten the screws.

STEP 3

Guide the cable ties through the slot in the handlebar bracket,
place around the handlebars or the stem and pull (do not pull
tight just yet).

STEP 4

For handlebar attachment: align the computer angle to
achieve optimum readability.
Now pull the cable ties tight.

Use clippers to snip off protruding ends.

Advertising