VDO M5WL - Manual (Page 28)

28
M5
Settings – sensor selection
The M5 can display heart rate and (simultaneously)
cadence data.
To do this, a heart rate and/or cadence transmitter must be
available and installed. Use the sensor selection menu to
select the sensor that should be activated.
ATTENTION: once a transmitter has been selected, the
sensor values (heart rate/cadence) appear on the display.
The display changes.
The layout of the functions on the buttons also changes.
Further information on this is provided on page 51 for the
heart rate option and on page 53 for the cadence option.
How to select the sensors:
Press and hold the
SET button until the settings menu opens.
Press the BIKE button to move from Totals to Settings.
Press the SET button to open the settings.
“Language” appears on the display.
Press the BIKE or TPC button to scroll to the setting for the
Sensor.
Press the SET button to open the settings.
Heart rate OFF or ON flashes.
Press the
BIKE or TPC button to select ON or OFF.
Press the SET button to confirm the setting.
You can now select whether the cadence transmitter
should be activated.
Press the BIKE or TPC button to select ON or OFF.