24 m5 settings – wheel circumference/wheel size – VDO M5WL User Manual

Page 24

Advertising
background image

24

M5

Settings – wheel circumference/wheel size

Manual setting by entering the roll circumference

in millimetres

The first two digits (in the example “21”) flash.
Press the

BIKE or TPC button to set these digits to the

desired value.

Press the

SET button to confirm your setting.

The third digit now flashes and is ready to be set.
Press the

BIKE or TPC button to set this digit.

Press the

SET button to confirm your setting.

The final digit on the right now flashes.
Press the

BIKE or TPC button to set this digit.

Press the

SET button to confirm your setting.

Your wheel circumference setting is now complete.
The response

‘Set OK’ appears on the display.

If you want to configure further settings,
press the

BIKE button to access these.

If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.

The VDO M5 returns to function mode.

Advertising