Velodyne Digital DrivePLUSSeries - Manual (Page 29)

CHOOSE INTERFACE TO USE WITH MANUAL-EQ OPTIMIZATION
This section is an overview of the subwoofer optimization interface options so you can choose which to use for Manual-EQ optimization.
You can perform Manual-EQ optimization using either the TV or Windows Setup Program interface. The Setup Program comes with your
Digital Drive PLUS and needs to be installed on a Windows XP, Vista or 7 computer.
If you want to use the Auto-EQ, Self-EQ or Place & Play method, you won’t need to use either, so you can skip this section. However, if you’re
curious to see the low frequency response output of your audio system using Auto-EQ, you can view it with both of these interfaces.
INTERFACE CHOICES FOR THE MANUAL-EQ OPTIMIZATION METHOD
Windows Computer TV Screen
Velodyne Recommendation Preferred Use if you don’t have a Windows XP, Vista or
7 laptop or desktop computer
Time to Setup Fast. Doesn’t require access Depends on how accessible the video input connector is
to TV video input. on your TV. With many entertainment systems, the TV’s
composite video or S-video input may be difficult to
reach because it is usually on the back of the TV close
to a wall. Also, the video input is often already connected
to another video component.
Equipment Required Windows laptop or desktop computer TV with composite video or S-video input
Operating System Requirements Windows XP, Vista or 7 (MAC OS N/A
and Linux OS not supported)
Software Required The included Setup Program N/A
installed on the Windows computer
[ 26 ]
Digital Drive PLUS User’s Manual OPTIMIZATION