Velodyne Digital DrivePLUSSeries - Manual (Page 33)

response. The lowest distortion setting of 8 lowers the
overall perceived level because of the elimination of
distortion products, producing a very tight and “fast”
sounding bass – well suited for listening to music. Numbers
in between yield a result either more towards the one end
or the other. You can determine the best setting by listening.
The subwoofer’s setup preset parameters don’t include this
setting as it is like the contour: different for each preset.
The factory setting for the presets are:
• N/A for the setup preset
• 8 (least distortion) for Theater (Preset 1)
• 6 (low distortion) for Rock (Preset 2)
• 8 (least distortion) for Jazz (Preset 3)
• 8 (least distortion) for Custom (Preset 4)
• 3 (moderate distortion) for Games (Preset 5)
• 8 (least distortion) for Defeat (Preset 6)
Default Preset No No This is the preset used when your subwoofer is powered on
from the off state. The factory setting is preset 3. This
preset can be set to any one of the presets using either the
TV screen interface or Windows setup interface. When the
standby mode is used from the remote (red button), the
preset stays the same as the last setting and does not
revert to the default setting.
[ 30 ]
Digital Drive PLUS User’s Manual OPTIMIZATION
EQ Parameter Set with Set with Description
Auto-EQ PLUS Self-EQ